|
Lremote
PC software to enable DV-IN for Sony camcorders.
SMARTdv GOLD AWARD WINNER
CAMCORDER USER
This software is similar to our award wining Panadvin SEE REVIEW
Please note: Items marked with *
have restrictions, see table below for further details.
| Enable DV-IN to the following SONY
Camcorders: |
 |
PC1e
PC2e
PC3e
PC4e
PC5e
PC6e |
PC7e*
SC100e*
DSR200e
DSR200AP
VX700e
VX1000e*
|
VX9000e*
TRV5e
TRV6e
TRV7e
TRV8e
TRV9e*
|
TRV10e
TRV11e
TRV15e
TRV17e
TRV890e
|
| TRV130e* can only
be enabled at our office via DV IN SERVICE |
|
| |
|
| Analogue IN, S-Video IN & DV-IN inputs
can be enabled for recording as well as Manual White Balance menu is
enabled on models below. |
 |
TRV110e
TRV210e |
TRV310e
TRV410e |
TRV510e
TR7000e |
TR71000e
|
| Analogue IN, S-Video IN & DV
IN inputs can be enabled for recording, Manual White Balance as well as
AVin to DVout Pass through (AV>DV Real-time Converter) menu is enabled
on models below. |
TRV120e
TRV125e
TRV220e
TRV225e |
TRV230e
TRV235e
TRV320e
TRV325e |
TRV330e
TRV335e
TRV420e
TRV430e |
TRV520e
TRV530e
TRV725e
TRV8000/8100 |
| |
|
|
|
If your camcorder is not listed please
do not email us asking if it can be done. These unlisted models will be
hardware locked and therefore cannot be DV enabled.
RESTRICTIONS:
PC7, This camcorder does not have a LANC plug. You need the
LANC/Microphone adapter VMC-LM7 (available from SONY)
TRV130e can only be enabled at our office via the dv in service
|
Camcorder |
could be enabled up to serial No. |
probable Limit |
Could not be enabled above serial No. |
|
VX1000e |
436xx |
44200 |
443xx |
|
TRV9e |
530xx |
???
|
???
|
|
SC100e |
102xx |
??? |
103xx |
|
VX9000 |
159xx |
???
|
195xx |
Questions and Answers
How complicated is DVin enabling?
Actually this is very easy:
Under Win 95/98/ME/2000 and XP
- Using the supplied cable connect your camcorder to your PC and power
on camcorder. Run the program supplied on the floppy disk. There is no
need to install the software to your hard drive.
- Press the "Identify" button, the software will identify Your
camcorder.
- Press the "Enable DV-IN" or "Disable DV-IN" button, according to what
you want to do. Wait until the software has finished (this takes 1 to 3
minutes depending on Your camcorder Model)
Please note: once the camcorder is DV-IN enabled it may be used on
any editing system as long as the editing card supports the camcorder e.g.
Apple Imac.
Can I enable recording of analogue video ?
This is only possible on the Digital8 camcorders. To record analogue video
you need to turn on your camcorder in Player mode and connect the analogue
video to the terminals normally used for playback. On some Digital8 models
you may AVin to DVout Pass through (AV>DV Real-time Converter) by turning on
the feature in the menu.
Do I have to enable DV-IN whenever I want to record a digital video ?
No. Your camcorder "remembers" that dvin has been enabled, even when you
turn off power.
Can I disable DV-IN later?
Yes. Lremote makes this as easy as enabling.
What System do I need to use Lremote?
You need a PC with a 486 or faster processor running Windows 95/98SE/ME/XP
or 2000. Unfortunately many notebook PCs do have a slightly incompatible
parallel printer port chip and can not be used with Lremote. Lremote will
not work in a Windows NT, Linux,... DOS Box or on a Macintosh.
THIS PRODUCT IS NEITHER SUPPLIED OR
ENDORSED BY SONY, USING THIS PRODUCT ON YOUR CAMCORDER WILL INVALIDATE IT'S
WARRANTY.
PC1e, PC2e, PC3e,PC4e, PC5e, PC7e, TRV5e, TRV7e,
TRV8e, TRV9e, TRV10e, TRV11e, TRV890e, SC100e, DSR200e, VX700e, VX1000e,
VX9000e,TR7000e, TR7100e, TRV110e, TRV210e, TRV310e, TRV410e, TRV510e,
TR8000e, TR8100e, TRV120e, TRV125e, TRV220e, TRV320e,TRV420e and TRV520e are
Trade Marks of Sony. |
